Nortel Networks 201i Manuel D’Utilisation

November 2006

Installing the 201i server in the Succession 1000 system

201i Server Hardware Installation

105

    

a. Use a slot screwdriver to gently pry off the SUCCESSION label.

b. Insert the screwdriver approximately 2 cm (0.75 in.) into the open slot, 

and then gently lift the screwdriver handle, thus applying downward 
pressure on the tab inside the bezel. 

At the same time, gently pull the bezel away from the chassis 
(approximately 2 cm [0.75 in.]) until the inside tab has cleared the 
catch. 

c. Grasp the bezel by both sides and carefully pull it straight away from 

the Media Gateway or Media Gateway Expansion.

G101620