Omron CJ1W-EIP21 Manuel D’Utilisation
108
Private and Global Addresses
Section 5-3
• With FINS/UDP, when the IP address (private address) of a computer
serving as a DHCP client is changed, the IP address conversion method
of the EtherNet/IP Unit or built-in EtherNet/IP port will be the automatic
generation method (dynamic), the combined method, or the IP address
table method. When FINS/TCP is used, IP addresses can be changed
automatically.
of the EtherNet/IP Unit or built-in EtherNet/IP port will be the automatic
generation method (dynamic), the combined method, or the IP address
table method. When FINS/TCP is used, IP addresses can be changed
automatically.
■
Explicit Message Communications Service
• The explicit message communications service can be executed on the
intranet between EtherNet/IP Units and built-in EtherNet/IP ports with pri-
vate addresses only.
vate addresses only.
• A device such as a personal computer (CIP applications including the
Network Configurator) cannot connect online and communicate over the
Internet with an EtherNet/IP Unit or built-in EtherNet/IP port that has a pri-
vate address. Explicit message communications are also not possible
over the Internet between EtherNet/IP Units and built-in EtherNet/IP ports
with private addresses.
Internet with an EtherNet/IP Unit or built-in EtherNet/IP port that has a pri-
vate address. Explicit message communications are also not possible
over the Internet between EtherNet/IP Units and built-in EtherNet/IP ports
with private addresses.
Note Network Security and Firewalls
Setting up an intranet through a global address involves network security con-
siderations. Before doing so, be sure to consult with a network specialist and
consider installing a firewall.
Once a firewall has been set up by a communications technician, on the other
hand, there may be some applications that cannot be used. Be sure to check
first with the communications technician.
siderations. Before doing so, be sure to consult with a network specialist and
consider installing a firewall.
Once a firewall has been set up by a communications technician, on the other
hand, there may be some applications that cannot be used. Be sure to check
first with the communications technician.