Nortel Networks M3820 Manuel D’Utilisation
72
Digital Telephone IP Adapter Installation and Administration Guide
Installing the Digital Telephone IP Adapter unit
Standard 2.1
3
Use both hands to push forward until the circuit card snaps into place under
the brackets.
the brackets.
Note: Two holes on either side of the circuit card are now aligned with the
corresponding holes on the footstand.
corresponding holes on the footstand.
4
Attach the Digital Telephone Internal IP Adapter circuit card to the footstand
with the screws supplied in the Installation Kit.
with the screws supplied in the Installation Kit.
Note: Refer to “D” in the diagram on page 72.
5
Plug the male RJ-11 connector on the loose end of the Meridian Line Cord
attached to the Digital Telephone Internal IP Adapter circuit card into the
jack on the telephone.
attached to the Digital Telephone Internal IP Adapter circuit card into the
jack on the telephone.
6
Re-attach the footstand to the bottom of the telephone.
7
Apply the overlay identifying the power connection and the jack connecting
your Ethernet for IP network connectivity.
your Ethernet for IP network connectivity.
G101493
C
circuit card
D