Omega Vehicle Security zSeries Manuel D’Utilisation
7
2.4 Disassembly - End Device
You may need to open the unit for one of the following reasons:
You may need to open the unit for one of the following reasons:
•
To turn on Power Switch.
•
To mount unit to wall. Refer to
Figure 2.2 for mounting dimensions.
•
To connect or replace the batteries, (note the polarity of batteries).
•
To access JTAG connector.
Remove Cover as shown below, by pressing sides of cover to release latches.
Figure 2.4 Disassembly of the End Device
COVER
LATCH
SENSOR
BOARD
EXTERNAL
SENSOR/
PROBE
TRAY
POWER SWITCH
BATTERY CLIPS
LATCH
DIP SWITCH
MOUNTING SCREW
JTAG
8
1