Nortel Networks 4050 Manuel D’Utilisation
122 Chapter 4 Configuring the domain
320818-A
When you first create the domain, you are prompted to enter the following
parameters:
parameters:
•
domain name — a string that identifies the domain on the Nortel SNAS 4050,
as a mnemonic aid. The maximum length of the string is 255 characters.
as a mnemonic aid. The maximum length of the string is 255 characters.
•
portal Virtual IP address (pVIP) — the IP address of the Nortel SNAS 4050
portal. You can have more than one pVIP for a domain. To specify more than
one pVIP, use a comma separator. The pVIP is the address to which the client
connects for authentication and host integrity check. For more information,
see
portal. You can have more than one pVIP for a domain. To specify more than
one pVIP, use a comma separator. The pVIP is the address to which the client
connects for authentication and host integrity check. For more information,
see
The Domain menu displays.
shows sample output for the
/cfg/domain
<domain ID>
command and commands on the Domain menu. For more