Nortel Networks 4050 Manuel D’Utilisation
Chapter 10 Configuring system settings 485
Nortel Secure Network Access Switch 4050 User Guide
Enabling TunnelGuard SRS administration using the CLI
To create and modify the TunnelGuard Software Requirement Set (SRS) rules,
you must use the SREM (see
you must use the SREM (see
). Before
you can access the Rule Builder utility in the SREM, you must enable support for
SRS administration.
SRS administration.
To configure support for managing the SRS rules, use the following command:
/cfg/sys/adm/srsadmin
The SRS Admin menu displays.
The SRS Admin menu includes the following options:
Configuring Nortel SNAS 4050 host SSH keys using the CLI
The Nortel SNAS 4050 functions as both SSH client (for importing and exporting
logs using SFTP) and SSH server for secure management communications
between the Nortel SNAS 4050 devices in a cluster.
logs using SFTP) and SSH server for secure management communications
between the Nortel SNAS 4050 devices in a cluster.
The SSH host keys are a set of keys to be used by all hosts in the cluster in
accordance with the Single System Image (SSI) concept. As a result, connections
to the MIP always appear to an SSH client to be to the same host.
accordance with the Single System Image (SSI) concept. As a result, connections
to the MIP always appear to an SSH client to be to the same host.
/cfg/sys/adm/srsadmin
followed by:
port <port>
Specifies the TCP port used for communication with
the SRS administration server. The default is
port 4443.
the SRS administration server. The default is
port 4443.
ena
Enables SRS administration, for creating and
managing SRS rules.
managing SRS rules.
dis
Disables SRS administration. The default is disabled.
Note: SCP is not supported.