Nortel Networks 4050 Manuel D’Utilisation
Chapter 14 Maintaining and managing the system 733
Nortel Secure Network Access Switch 4050 User Guide
Managing Nortel SNAS 4050 devices using the CLI
To manage Nortel SNAS 4050 software and devices, use the following command:
/boot
The Boot menu displays.
The Boot menu includes the following options:
/boot
followed by:
software
Accesses the Software Management menu, in order
to view, download, and activate software versions (see
to view, download, and activate software versions (see
).
halt
Stops the Nortel SNAS 4050 device to which you are
connected (using Telnet, SSH, or a console
connection). If you have a Telnet or SSH connection to
the Management IP address (MIP), use the
connected (using Telnet, SSH, or a console
connection). If you have a Telnet or SSH connection to
the Management IP address (MIP), use the
/cfg/sys/host #/
halt
halt
Note: Always use the
halt
command before turning
off the device.