Nortel Networks 4050 Manuel D’Utilisation
98 Chapter 3 Managing the network access devices
320818-A
Adding VLANs to a domain
To add VLANs to a domain, complete the following steps:
1
Select the Secure Access Domain > domain > VLANs tab.
The domain VLANs screen appears (see
).
2
Click Add.
The Add a new VLAN dialog box appears (see
Figure 9
Add a new VLAN
3
Enter the VLAN information in the applicable fields.
describes the
Add a new VLAN fields.
4
Click Add.
The new VLAN appears in the VLAN Table.
5
Repeat this step for each Green and Yellow VLAN configured on the domain.
6
Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
Table 5
Add a new VLAN fields
Field
Description
Name
The name of the VLAN, as configured on the domain.
ID
The ID of the VLAN, as configured on the domain.