Nortel Networks 4050 Manuel D’Utilisation
80 Chapter 3 Managing the network access devices
320818-A
The
delete
command removes the current switch from the control of the Nortel
SNAS 4050 cluster.
Configuring the network access devices using the CLI
When you first add a network access device to the Nortel SNAS 4050 domain, the
switch is disabled by default. Do not enable the switch until you have completed
configuring it. In particular, do not enable the switch until you have mapped the
VLANs (see
switch is disabled by default. Do not enable the switch until you have completed
configuring it. In particular, do not enable the switch until you have mapped the
VLANs (see
) and exchanged the
necessary SSH keys (see
).
If you want to reconfigure the VLAN mappings or delete a VLAN for an existing
network access device, use the
network access device, use the
/cfg/domain #/switch #/dis
command to
disable the switch first.
To configure a network access device in the Nortel SNAS 4050 domain, use the
following command:
following command:
/cfg/domain #/switch <switch ID>
where
switch ID
is the ID or name of the switch you want to configure.
The Switch menu displays.
Note: Remember to enable the network access device after completing
the configuration in order to activate the network access device in the
Nortel SNA network.
the configuration in order to activate the network access device in the
Nortel SNA network.