GE 23954 Manuel D’Utilisation
2.2.6 Time command group
The time command group allows to enable/disable different services. Note that the local (serial)
connection cannot be disabled.
connection cannot be disabled.
Command Parameters
Description
showtime
Show all configured time settings
ntponoff
on | off
Enable/disable NTP client
on
on
NTP client enabled
off
NTP client disabled
ntp-server
[hostname]
Define NTP server
[hostname] hostname or IP-address of the NTP server
NOTE: using hostnames requires DNS connection.
[hostname] hostname or IP-address of the NTP server
NOTE: using hostnames requires DNS connection.
Force clock synchronisation with NTP server
ntpdate
Set the time-zone.
NOTE: the time-zone controls both the time difference with
respect to GMT and the daylight-saving settings. As the
time-zone is specified as a Region/Country pair, selecting
the correct time-zone will ensure that the adapter
computes the correct time.
NOTE: the time-zone controls both the time difference with
respect to GMT and the daylight-saving settings. As the
time-zone is specified as a Region/Country pair, selecting
the correct time-zone will ensure that the adapter
computes the correct time.
(*)
tmzone
settime
MMDDhhmm[[CC]YY][.ss]
Set the date & time
MM month
DD day
hh hour
mm minute
[CC]YY year
ss seconds
MM month
DD day
hh hour
mm minute
[CC]YY year
ss seconds
(*) By running the tmzone command, an interactive menu is launched – follow the on-screen
instructions.
NOTE: When using the local serial connection, make sure that the terminal emulation is set to VT-100,
otherwise the interactive menu may not be rendered correctly.
Modifications reserved
Page 19/58
OPM_CNT_SNM_BAS_CRD_1GB_V012.doc
Operating Manual SNMP/Web Adapter