GE 23954 Manuel D’Utilisation

In this page, the SNMP/Web adapter configuration file is shown in a text area. The configuration file can 
be exported by pressing the Highlight button and copying the selected text (e.g. CTRL+C) to a separate 
application. 
 
 

This page shall only be accessed when the SNMP/Web adapter SW is to be upgraded. Refer to the 
section for details on the SW upgrade process. 
 
NOTE: Use only GE officially released SW. Only perform the SW upgrade when requested to do so by GE.  
 
 
 

The SNMP section deals with SNMP and trap configuration. 
 
 

The most relevant SNMP settings are the following: 

 

Set SNMP server listening port. Default port is 161. 

Defines the community name for receiving SNMP information (GET). The get 
community name controls access to the SNMP Agent – the community in the 
request must match the getcommunity parameter. 

The default value is public. 

Defines the community name for writing SNMP information (SET). The set 

community name controls access to the SNMP Agent – the community in the 

request must match the setcommunity parameter. The default value is private. 

 
 

This page allows to configure up to 20 recipients of SNMP traps. The most relevant settings are the 
following: 

 

IP-address of the trap target 

Community name (optional – default is public) 

Controls SNMP trap version: 

 

If unchecked, v1 traps are sent (default)  

 

If checked, V2 traps are sent 

Port to which the trap will be sent  (optional – default 162) 

 
 

This page is used to configure the alarm notification via trap and/or e-mail. Every alarm is listed, and the 
user may enable the notification via trap and/or e-mail upon alarm (de)activation. 
 
 

Modifications reserved 

Page 32/58 

OPM_CNT_SNM_BAS_CRD_1GB_V012.doc 

Operating Manual SNMP/Web Adapter