Telenetics 56 Manuel D’Utilisation

ATSn= Set S Register Value

The Sn= commands enables you to change the value in a Special Register (S Register).

The format for the command is:

ATSn=x

where n is the number of the S Register whose value you wish to change and x is the value you
wish to place in the register.

For example:

The character interrpreted as being a carriage return, is determined by the value in S Register 3.

The default value of this register is 13. To change this value to 15:

•

Type: ATS3=15 <E>

It is important to alter values only in those S Registers listed for your modem. Placing a value in
any other S Register can have unforeseen consequences. Default values and the permissable
range of values for each S Register are detailed in the S Register section of this guide.

ATS2=2

Set S Register 2 with a value of 2

Sn? command

Display S Register Value