Telenetics 56 Manuel D’Utilisation

ATS18 Test Timer

S Register 18 contains the length of time, in seconds, that the modem will perform tests initiated
with any of the &T commands.

You can terminate any test by issuing an AT&T0 command, or by allowing the time in the Test
Timer to expire.

Placing a value of 0 in S Register 18 disables the Test Timer, forcing you to use an AT&T0
command to terminate tests.

ATS18=30

Terminate test after 30 seconds

0

S Register 16

Test in Progress (read only)

0-255