Tekram Technology TR-824 Manuel D’Utilisation
2. HARDWARE SETUP
TR-824 User’s Manual
8
2. HARDWARE SETUP
2.1 Board Layout
The following figures illustrate the chip and connector locations for the TR-824 PCI SATA Host Adapter.
TR-824
Serial ATA 4-channel Host Adapter
S
Sil3114
2.2 Installing TR-824
The TR-824 Controller card fits into any available 32-bit PCI slot (must be PCI 2.2 or 2.3 compliant). It
also fits the 32-bit portion of a 64-bit PCI slot, on the system’s motherboard (see figure below).
1. Remove the cover of your system.
2. Remove the inside slot cover of an available PCI slot on the motherboard.
3. Install the TR-824 Controller card into the open slot. Secure the bracket to the system’s frame.
4. Fasten the controller card bracket to the system case (see below).
also fits the 32-bit portion of a 64-bit PCI slot, on the system’s motherboard (see figure below).
1. Remove the cover of your system.
2. Remove the inside slot cover of an available PCI slot on the motherboard.
3. Install the TR-824 Controller card into the open slot. Secure the bracket to the system’s frame.
4. Fasten the controller card bracket to the system case (see below).
7-pi
n Seria
n Seria
l A
TA
conn
ec
tor