Digi 9P 9360/9750 Manuel D’Utilisation

5 8  

 

L x N E T E S   U s e r ’ s   G u i d e

The message above is printed if the file system was not cleanly unmounted. The system 

should not be powered off before all partitions are unmounted. After a clean unmount, the 

message should disappear.

The environmental variable bootargs must be updated to tell Linux that the rootfs is taken 

from Flash and it is stored in JFFS2 file system. Enter the following commands to 

manually initate these commands:

Depending on the flash type of your platform, use for NOR flash the following command 

to copy the kernel from Flash to RAM memory:

For NAND flash use the following command:

Now that the kernel image has been copied to RAM, we can execute Linux with the 

following command:

jffs2_get_inode_nodes(): Data CRC failed on node at 0xXX XXXXXX: Read 

0xXXXXXXXX, calculated 0xXXXXXXXX

#

 

#

 

#

 

#

 

#