Lucent Technologies 22A Series Fascicule

To learn more about our comprehensive
portfolio, please contact your Lucent
Technologies Sales Representative or
Lucent Business Partner, or visit our web
site at www.lucent.com.

This document is provided for planning
purposes only, and does not create,
modify or supplement any warranties
which may be made by Lucent
Technologies relating to the products
and/or services described herein. The
publication of information contained in
this document does not imply freedom
from patent or other protective rights of
Lucent Technologies or third parties.

CellPipe is a registered trademark of
Lucent Technologies Inc.

Copyright © 2003
Lucent Technologies Inc.
All rights reserved

CELL v2.0303

Specifications

1.ATM/ADSL

G.DMT, T1.413 i2 /Fast and Interleaved
Trellis Code
AAL5
UBR/GFR
CBR
VBR
Multiple VCs Support
UNI 3.1/4.0, SVC
OAM F4/F5 Loopback

2.Bridging/Routing

802.1d Transparent, Learning Bridge
Spanning Tree (STP)
RFC 2684 – Bridged
RFC 2684 – Routed
PPPoE
PPPoA
IPoA
IPv4, TCP, UDP, ICMP, ARP
RAPR as per RFC 0903
Virtual IP Interface
IP Routing – RIP v1 and v2
Static Routing
DHCP Server/Client/Proxy
DNS Proxy
IP Multicast, IGMP Proxy

3.Security

NAT
PPP with PAP/CHAP
Raw/IP Filtering
SPI
VPN: L2TP/PPTP Pass Through
DoS
ID/Password Authentication

4.Management

SNMP v1 and MIB II (RFC 1213)
HTTP Server
Auto VCI/VPI Detect
Command Line Interface
FTP, TFTP
TELNET
ZIPB (Zero Installation PPP Bridge Mode)
Surfing Profile
Layer 2 Management Protocol 
(without IP)
LEDs
TR-37
Dying Gasp

5.Host USB Drivers (22A-GX)

Windows 98SE, 2000, ME, XP
Concurrent USB and Ethernet

1.Dimensions

7.1 in x 5.7 in (18 cm x 14.5 cm)

2.Weight

11 ounces (300 grams)

3.LAN Interface

22A-GX / 22A-BX: 1 USB port and 
1 10/100 Ethernet Port
22A-EX / 22A-FX: 4 port 10/100
Ethernet Switch

4.Operating Environment

Temperature: 32 – 120°F (0° – 50°C)
Humidity: 5 – 95% non-condensing

5.Power Requirement

AC Voltage: 100 – 120 VAC, 
200 – 240 VAC
Frequency: 50/60 Hz
Power Consumption: 15 W maximum

6.Safety Compliance

UL 1950, CSA C22.2, EN60950

7.EMC/RFI Compliance

FCC Part 15 Class B, EN55022/CISPR
22 Class B, EN50082-1, CE, VCCI

8.WAN Interface

One ADSL interface (RJ-11 jack for annex
A models, RJ 45 for annex B models)

9.Line Impedance

100 ohms

10.Line Code

DMT

11.Compliance

ANSI T1E1.413 issue 2, ITU-T G.DMT
(G.992.1 annex A or annex B), G.Lite
(ITU G.992.2)

12.Line Speed

Full Rate (G.DMT): 8 Mbps downstream,
1 Mbps upstream 
G.Lite: 1.5 Mbps downstream, 
512 Kbps upstream

13.Analog Line Support

Supports the use of an external splitter