Encore electronic ENUWI-N3 Manuel D’Utilisation

 

 
 

The  Profile  tab is used to store the settings of multiple Access Points such as 
home, office, café, etc. When adding a profile you are required to enter a profile 
name and SSID as well as configure the power-saving mode, network type, 
RTS/fragmentation threshold and encryption/authentication settings.  A profile 
can be configured as Infrastructure or Ad-hoc mode. The configuration settings 
for each mode are described below.  
 
 

The infrastructure mode requires the use of an Access Point (AP). In this mode, 
all wireless communication between two computers has to be via the AP. It 
doesn’t matter if the AP is stand-alone or wired to an Ethernet network. If used in 
stand-alone, the AP can extend the range of independent wireless LANs by 
acting as a repeater, which effectively doubles the distance between wireless 
stations. 
 

 

                                                                                                                        13