Encore electronic ENUWI-N3 Manuel D’Utilisation

 
h  Authentication Type: Select TTLS from the drop-down list.  
h  Protocol: Select EAP-MSCHAP v2, MS-CHAP, or CHAP from the drop-

down list.  

h  Identity: Enter the user name. 
h  Password: Enter the password.  
h  Click on the OK button to save the changes.  
 

 

Depending on the EAP in use, only the server or both the server and client may 
be authenticated and require a certificate. Server certificates identify a server, 
usually an authentication or RADIUS server to clients. Most EAPs require a 
certificate issued by a root authority or a trusted commercial Certificate Authority. 

 

 

 

 

 
h  Use certificate chain: Place a check in this to enable the certificate use.  
h  Certificate issuer: Select the Certification Authority from the drop-down list.  
h  Allow intermediate certificates: During tunnel creation the client must 

verify the server’s certificate. When checking this certificate the signature 
is verified against a list of trusted certificate authorities. If this parameter is 

 

                                                                                                                        21