Encore electronic ENUWI-N3 Manuel D’Utilisation
indicates less interference.
h HT: High Through-Put / 802.11n Section
h BW: Channel Bandwidth
h GI: Guard Interval
h MCS: Modulation Coding Scheme
h Click on the OK button to close this window.
h dBm Check Box. When you click on the check box as the drawing
h BW: Channel Bandwidth
h GI: Guard Interval
h MCS: Modulation Coding Scheme
h Click on the OK button to close this window.
h dBm Check Box. When you click on the check box as the drawing
below. The signal strength and noise level will be shown as the dBm
measurements.
measurements.
Site
Survey
The Site Survey tab displays a list of Access Points and Stations in the area, and
allows you to connect to a specific one. The following information is included in
this tab, as the image depicts below.
allows you to connect to a specific one. The following information is included in
this tab, as the image depicts below.
h SSID: Displays the SSID of the Access Point. The SSID is a unique
name shared among all points in your wireless network. The SSID must
be identical for all points in the network, and is case-sensitive.
be identical for all points in the network, and is case-sensitive.
h BSSID: Displays the MAC address of the Access Point.
h Signal: Displays the receiving signal strength from the Access Point.
h Channel: Displays the channel number of the Access Point.
h Authentication: displays the authentication on the Access Point, this
h Signal: Displays the receiving signal strength from the Access Point.
h Channel: Displays the channel number of the Access Point.
h Authentication: displays the authentication on the Access Point, this
41