Emerson SiteI/O 10/0 Manuel D’Utilisation

 

 

Specification for SiteI/O 10/0 

 

 
DESCRIPTION:  The SiteI/O 10/0 is part of the SiteI/O-Line, which allows a complete SiteScan 
monitoring/control system to be built a piece at a time.  It is a 32 bit microprocessor-based device 
designed to monitor up to ten analog, digital, and/or dry contact type signals.  Individual hardware 
jumpers set signal-type selections.  Screw terminal blocks are provided to terminate power, 
communication, and input signal wiring.  
 
DIMENSIONS: 

Module: 

7.5” H x 11.3125” W x 2.75” D 

 

 

19.05 cm H x 28.73 cm W x 7 cm D 

 
 

Enclosure:  

20" H x 18" W x 2.87" D 

 

(Painted Steel) 

508mm x 457.2mm x 72.89mm 

 
 

See Enclosure Diagrams for mounting options. 

 
POWER: 24VAC 

± 10%, 50-60 Hz., 20 VA power consumption 

 

(120/24VAC 40VA Transformer available) 

 
INPUTS: 

Ten universal inputs, configurable for 0-5VDC, 0-20mA, or thermistor. 

 
ENVIRONMENTAL  
OPERATING RANGE:  0

° to 130° F (-17.8° to 54.4° C), 10 to 90% relative humidity, non-condensing 

 
COMMUNICATION: 

One (1) CMnet EIA-485 Port - Control Module network screw terminals 

 

Switch selectable baud rates ARC156 / 9600 or 38.4bps 
Recommended wire is: MAGNUM Cable pn A3-ARC-156-2 

 

(10)  Analog and/or Digital - screw terminals 

 

 

Jumper Selectable inputs 

 

 

Thermistor - 10k ohm @ 77

° F, 25°C 

 

 

0 to 5 VDC - 10k ohm max source impedance 

 

 

4 to 20mA -  24VDC loop power, 250 ohm input 

 

 

Dry Contact - 0.5mA sense current 

1 MB Flash Memory, 1 MB Non-volatile battery backed RAM. 

 
PROTECTION: 

Voltage, current, and ESD protection on incoming power. 

Seven-year lithium battery provides a minimum of 10,000 hours of data 

 

retention during power outages. 

  Liebert Corporation

                             Page 1 of 6                                   SL-28077 Rev.4; 7/03