Emerson IS-WEB485ADPT Manuel D’Utilisation

To access configuration using terminal emulation software with 
a serial connection to the Web card:

1. Open a terminal emulation application, such as 

HyperTerminal.
To do this:

• Click  the  Start button, then Programs, Accessories, 

Communications and finally HyperTerminal. 

2. In the Connection Description window, enter a name for the 

connection—for example, GXT2U—then click OK.

3. In the Connect To window:

• Choose COM3 from the Connect Using drop-down list.
• Click OK.

4. In the COM3 Properties window, enter the communication 

settings shown in Table 6.

5. When the message at right appears in the HyperTerminal window, 

press the Enter key.

6. In the Main Menu, enter the number that corresponds to your choice. 

Refer to 3.1 - Guide to Configuration for details on each function.

7. After making changes, return to the Main Menu and choose Exit and 

Save to reboot the Web card and put your changes into effect (see 
3.6 - Saving Changes and Reinitializing the Web Card).

Baud Rate:

9600

Data Bits:

8

Parity:

None

Stop Bits:

1

Flow Control:

None

RTCS v2.96.00 Telnet server

Service Port Manager Active
<Esc> Ends Session

Main Menu
----------
1: System Information
2: IP Network Settings
3: Messaging
4: Factory Settings
5: Firmware Updates

q: Quit and abort changes
x: Exit and save

Please select a key ?>