Emerson Xtreme Density Manuel D’Utilisation

The Liebert XDCF is a self-contained module designed to cool Egenera’s BladeFrame EX cabinets and 

equipment without exhausting heat into the room.
Upper and lower modules may be mounted on the rear of an Egenera BladeFrame. Liebert XDCF 

modules use R-134a refrigerant. When attached to a fully loaded BladeFrame EX rack, each Liebert 

XDCF module has a nominal cooling capacity of 10kW (2.8 tons; 34,000 BTUh). Performance is based 

on:

• Entering fluid temperature—55°F (12.8°C) and
• Dew point—50°F (10°C) or lower.

Liebert XDCF modules consist of a sheet-metal frame, coil and filter dryer. It has no moving parts 

and needs no electricity.
The Liebert XDCF system (see Figure 39 below) consists of:

• Liebert XDCF modules—upper and lower models are available
• Flex pipe—connects Liebert XDCF units to supply and return piping
• Liebert XD Piping—delivers pumped R-134a refrigerant through flexible piping
• Liebert XDP or Liebert XDC—supplies R-134a refrigerant to Liebert XDCF modules

(see Liebert XDP or Liebert XDC user manual for required chiller or drycooler)