WatchGuard Technologies SOHO 6.1 Manuel D’Utilisation
Chapter 4: Configure the Network Interfaces
40
WatchGuard Firebox SOHO 6.1
4
Disable the checkbox labeled Enable DHCP Server on the
Trusted Network.
Trusted Network.
5
Click Submit and reboot the SOHO 6 as necessary.
6
Configure your computers and other devices on the trusted
network with static addresses.
network with static addresses.
Configure Static Routes
The SOHO 6 allows you to configure static routes in order to pass
traffic to networks on separate segments. This means that the
SOHO 6 can route data packets to additional networks connected
to a router or switch behind the SOHO 6.
Follow these instructions to configure static routes:
traffic to networks on separate segments. This means that the
SOHO 6 can route data packets to additional networks connected
to a router or switch behind the SOHO 6.
Follow these instructions to configure static routes:
1
With your Web browser, go to the System Status page using the
Trusted IP address of the SOHO 6.
Trusted IP address of the SOHO 6.
For example, if using the default IP address, go to: http://192.168.111.1
2
From the navigation bar on the left side, select
Network => Routes.
Network => Routes.