Wayne-Dalton WDSF-10 Manuel D’Utilisation

23

Select ReCeIVe UPDATe FRoM PRIMARY CoNTRoLLeR.

Initiate Primary Controller to SeND RePLICATIoN.

When you add or remove modules 
using the Primary Controller, those 
changes will generally not be reflected 
in the Thinkessentials

®

 software when 

Thinkessentials

®

 is a secondary 

controller in the network until it is 
updated using the following procedure.  

1.  Activate the RePLICATIoN SeND 
mode on your Primary Controller.  This 
option may also simply be referred to as 
ADD DeVICe, ADD CoNTRoLLeR or 
RePLICATe NeTWoRk INFoRMATIoN 
oNLY.

Note:  Please see the User Manual 
or Instruction Manual for the specific 
Z-Wave

®

 controller being used for 

information on how to RePLICATe 
SeND or CoPY To, node and scene 
information.

2.  Switch to the SeTTINGS tab, and 
then click the ReCeIVe UPDATe FRoM 
PRIMARY CoNTRoLLeR link.
The controller will then automatically 
send the USB Z-Wave

®

 adapter a full 

listing of all the devices in the 
network as well as routing information.  
Thinkessentials

®

 will indicate if the 

process was successful.  If it was not 
successful, it will be necessary to repeat 
this step.

NoTe: Any time you add or remove a 
device using the Primary Controller, 
Thinkessentials

®

 should be updated by 

repeating this process.

NoTe: The process of receiving network 
updates is often referred to as ReCeIVe 
CoNFIGURATIoN or RePLICATIoN 
ReCeIVe mode.  The overall process is 
often called CoNTRoLLeR RePLICATIoN.

oN

oFF

1

2

3

4

5

6

DeLeTe

INCLUDe

example of 
Primary 
Controller







