RAD Data comm RIC-155 Manuel D’Utilisation

RIC-155 Installation and Operation Manual 

Chapter 4  Configuration 

 

Configuring RIC-155 for Management 

4-3 

RIC-155 can be managed by a network management station, which is located on 
the LAN connected to the unit’s MNG port. In order to establish a proper 
connection, it is necessary to configure the following: host IP address, subnet 
mask, default gateway, its trap, read and write communities. 

 

•  Host IP address 
•  Host IP mask 
•  Host default gateway 

•  Host Tagging 
•  VLAN ID 
•  Host VLAN priority. 
They can be configured from a supervisory terminal only. 

 

 

To define the IP parameters: 
1.  Follow the path: Configuration > System Configuration > Management > 

. 

The Host IP menu appears (see 

2.  From the Host IP menu, perform the following: 

 

Select Host IP List to define the host IP address and IP mask in the Host IP 
List menu (see 

). 

 

Select Host Default Gateway to set the default gateway IP address. 

 

Select Read Community to enter the name of a community with read-only 
authorization. 

 

Select Write Community to enter the name of a community with write 
authorization. 

 

Select Trap Community to enter the name of a community to which 
RIC-155 sends traps. 

 

Select Host Tagging and set it to Tagged or Untagged to enable or disable 
VLAN tagging performed by the host. 

 

If the host tagging is enabled, select VLAN ID to enter the ID of the host 
VLAN (0–4094). 

 

If the host tagging is enabled, select Host VLAN priority to specify priority 
of the host VLAN (0–7).