Quantum Audio A-Series Manuel D’Utilisation

Page de 105
Chapter 3  Using Your Tape Drive
A-Series Data Cartridges
Quantum A-Series Tape Drives User’s Guide
20
Write Protecting an 
Ultrium Data Cartridge
3
Ultrium tape cartridges have a sliding write-protect switch at the right-
rear corner as shown in 
Figure 7  Write-protect Switch 
on Ultrium Data Cartridge 
Loading a Data 
Cartridge
3
To load a data cartridge into the front of the A-Series tape drive:
1
Insert the data cartridge into the front of the tape drive, as shown in 
.
2
Push the data cartridge into the tape drive.until the drive senses the 
cartridge and automatically completes the load operation.
The 
Drive Status
 LED flashes to show that the media is loading. When 
the media reaches the Beginning of Tape (BOT) marker, the LED 
lights steadily. The data cartridge is now ready for use.
Sliding the write-protect 
switch toward the . . .
Enables data to be . . . 
center of the cartridge 
(the Locked position), 
read from the cartridge, but not written to 
it. (This is the write-protected position.)
corner of the cartridge 
(the Unlocked position), 
both read from and written to the 
cartridge. (This is the write-enabled 
position.)
Write protect switch (unlocked)
Unlocked
Locked
Front