Quantum Audio PX502 Manuel D’Utilisation

Introduction .......................................1

Notational Conventions .................1

Choosing a Location ..........................2

Rack Space Requirements...............2
Environmental Conditions .............2

Preparing for the Installation ...........2

Providing Necessary Tools ..............2
Taking ESD Precautions ..................2

Unpacking the PX502 Tape Library ...2
Installing the Library .........................3

Locating the Mounting Position ....3
Installing the Library ......................4
Initial Configuration .....................11

Multiple Library Stacks....................15

Introduction

0

The PX502 tape library is an automated storage and retrieval device consisting of 
up to two tape drives and up to 32 SDLT cartridges or 38 LTO tape cartridges (see 

0

This instruction uses the following conventions:

This document explains how to unpack the PX502 tape library and install it in a 
standard 19 in. rack. Once the library is unpacked and installed, set up the library 
using the instructions in the 

PX500 Series 

 PN 81-81290. This 

Figure 1  PX502 Tape Library

N

OTE

: Notes emphasize important information related to the main topic.

C

AUTION

: Cautions indicate potential hazards to equipment and are included 

to prevent damage to equipment.

W

ARNING

: Warnings indicate potential hazards to personal safety and are 

included to prevent injury.

N

OTE

: It is recommended to review the entire document prior to beginning the 

installation.