RAD Data comm IPmux-1E Manuel D’Utilisation

Appendix E Parameters and Screens

IPmux-1/1E Installation and Operation Manual

E-14

IPmux-1 E1/T1 Configuration

➤

To overwrite the system and reconfigure it according to default settings:
• Type Y.

IPmux-1 is reconfigured according to default settings. Following this,
IPmux-1 performs an automatic Reset.

OR
• Type N to exit and return to the General Configuration menu.

1. Setting default parameters from an ASCII terminal erases all the configurations

and optionally asks if you want to erase Host IP and Default Gateway

Configuration.

2. Setting default parameters from Telnet or NMS does not erase the Host IP or

Default Gateway Configuration.

E.4 IPmux-1 E1/T1 Configuration

E1 Configuration

E1 CONFIGURATION

1. Channel Status

Enable

2. Transmit Clock Source

Adaptive

3. Loopback State

Disable

4. Rx. Sensitivity

-10dB

5. Line Type

CRC4 enable

6. Idle Code

7. Signaling Mode

CAS enable

8. Cond. Data pattern

9. Cond. CAS (ABCD)pattern

ESC. Exit

Select item from the menu.

Use <Esc> key or keys <1> to <9>

Figure E-19. E1 Physical Layer Configuration Menu

When “unframed” mode is selected, the Idle Code, Signaling Mode, Cond Data

Pattern and Cond CAS Pattern fields are not present.

When CAS Disabled is selected, the Cond CAS Pattern field is not present.

Note

Main Menu
↓

2. Configuration
↓

2. E1/T1

Configuration

Note

Order from: Cutter Networks

Ph:727-398-5252/Fax:727-397-9610