RAD Data comm IPmux-1E Manuel D’Utilisation

Chapter 1 Introduction

IPmux-1/1E Installation and Operation Manual

1-6

Overview

IPmux-16

Telephony Switch

BRI

ISDN
Phones

FXS

E1/T1

IPmux-1

IPmux-1E

Ethernet
Switch

IP Network

Internet

Switch

Figure 1-6. Ethernet-based Multi-tenant Application with Voice and Data Integrated Access

Features

IPmux-1/1E is a 1U high, easy-to-install standalone unit. A rack mount installation
option is available.
IPmux-1 can be ordered with AC or DC power supply. IPmux-1E is only available
with AC power supply.

Management

IPmux-1/1E can be managed locally by connecting an ASCII terminal to the

RS-232 port on the front panel or remotely via Telnet or SNMP. The SNMP
management capability enables fully graphical, user-friendly management using

the RADview network management stations offered by RAD, as well as
management by other SNMP-based management systems.

The T1 port and framers comply with ANSI T1.403 standards. T1 jitter

performance is according to G.704, G.824, TR-62411. The T1 framers support
pass-through, SF, ESF and CAS framing. The T1 port supports long haul and short

haul input signals and can be monitored for alarms and error statistics. FDL and
transmit PRM for T1/ESF are also supported.

The E1 port complies with G.703, G.704, and G.823 standards. E1 framers comply

with G.704. The E1 framers support pass-through, framed, CRC4 MF and CAS MF
framing. The E1 port supports long haul and short haul input signals and can be

monitored for alarms and error statistics.

Order from: Cutter Networks

Ph:727-398-5252/Fax:727-397-9610