RAD Data comm ASMi-31 Manuel D’Utilisation
16-03-00 15:51
ASM-MN-214 Card Cage
5-1
Chapter 5
Card Cage Version
Card Cage Version
This chapter describes the ASMi-31/R card version, designed for installation
in the ASM-MN-214 card cage. The chapter contains the following sections:
in the ASM-MN-214 card cage. The chapter contains the following sections:
•
Section 5.1 describes the ASM-MN-214 card cage
•
Section 5.2 describes the ASMi-31/R card version
•
Section 5.3 describes the power supply to ASMi-31/R
•
Section 5.4 describes how to install ASMi-31/R.
5.1 ASM-MN-214 Card Cage
The ASM-MN-214 card cage contains one or two power supplies and up to
14 plug-in cards. The card types can be ASMi-31/R or other RAD rack
version modems/converters - any combination of up to 14 plug-in cards.
For each of the 14 cards, the rear panel (see Figure 5-1) contains a male
connector for the terminal block and a DB-25 connector. A protection cover
protects the terminal block connectors.
The terminal block (see Figure 5-1) is to be attached to the rear panel
terminal block connectors. It contains screws for connecting the transmit
and receive pairs and ground, if present.
The 25-pin D-type female interface connector provides all interface signals
for the digital interfaces. Modems with X.21 or V.35 interface require an
external mechanical adapter.
Two optional interface attachments, CIA/V.35/1 and CIA/X.21, can be
ordered separately from RAD. CIA/X.21 converts two adjacent DB-25
connectors to two X.21 15-pin connectors. CIA/V.35/1 converts one DB-25
connector to a V.35 34-pin connector.
V.36 modem cards are supplied with a RAD adapter cable CBL 530/449F,
which converts the DB-25 connector to a V.36 37-pin connector. The
adapter cable and two interface attachments are also shown in Figure 5-1.
14 plug-in cards. The card types can be ASMi-31/R or other RAD rack
version modems/converters - any combination of up to 14 plug-in cards.
For each of the 14 cards, the rear panel (see Figure 5-1) contains a male
connector for the terminal block and a DB-25 connector. A protection cover
protects the terminal block connectors.
The terminal block (see Figure 5-1) is to be attached to the rear panel
terminal block connectors. It contains screws for connecting the transmit
and receive pairs and ground, if present.
The 25-pin D-type female interface connector provides all interface signals
for the digital interfaces. Modems with X.21 or V.35 interface require an
external mechanical adapter.
Two optional interface attachments, CIA/V.35/1 and CIA/X.21, can be
ordered separately from RAD. CIA/X.21 converts two adjacent DB-25
connectors to two X.21 15-pin connectors. CIA/V.35/1 converts one DB-25
connector to a V.35 34-pin connector.
V.36 modem cards are supplied with a RAD adapter cable CBL 530/449F,
which converts the DB-25 connector to a V.36 37-pin connector. The
adapter cable and two interface attachments are also shown in Figure 5-1.
Order from: Cutter Networks
Ph:727-398-5252/Fax:727-397-9610
www.bestdatasource.com