Quantum Audio Scalar 50 Manuel D’Utilisation
Quantum Scalar 50 Tape Drive Installation Instructions
Document 81-81769-01 B01
September 2007
Introduction
3
Introduction
0
This document provides instructions for adding a tape drive to an Scalar 50
tape library. The tape drive upgrade procedure consists of the following
steps:
•
•
•
•
•
•
Tape Drive Numbering
0
The Scalar 50 tape library may contain up to 4 tape drives depending on the
tape drive type. Refer to the following figures:
•
•
Full height drives (up to two per library)
•
Half-height drives (up to four per library)
Figure 1 Scalar 50 Cable
Configuration (Full Height
Drives)
Configuration (Full Height
Drives)
Note:
Half-height tape drive canisters are ONLY available in Scalar 50
tape libraries.
Back of Library
Tape drive 1
Tape drive 2