PowerFile A3 Manuel D’Utilisation

Active Archive Appliance (A3) v6.5

PowerFile Confidential

 Racking and Installation Guide

The outer rails attach to the server rack and hold the server in place. The outer rails for the 
Archive Engine extend between 32 inches and 34 inches (or up to 40 inches with the extension).

1. Assemble the outer rail by attaching the short section of the rail to the outside of the long section 

of the rail. You must align the pins with the slides. Also, both bracket ends must face the same 
direction.

2. Adjust both the short and long brackets to the proper distance so that the rail fits snugly into the 

rack.

3. Secure the long bracket side of the rail to the front side of the rack with two of the M5x16 screws 

and the provided washers. 

4. Secure the short bracket side of the rail to the rear side of the rack with two of the M5x16 screws 

and the provided washers.

5. Repeat steps for the other outer rail.

Secure to Front of Rack

Attach Outer 
Rails Together

Secure to Rear of Rack