Grandstream Networks GXW-410xv Manuel D’Utilisation

Choose Yes to enable automatic upgrade and provisioning.  In “Check for new firmware 
every” field, enter the number of days to enable GXW-410xv to check the server for 
firmware upgrade or configuration in the defined period of days.  When set to No, GXW-
410xv will only do upgrade once at boot up. 
“Always check for New Firmware.”  Check New Firmware only when F/W pre/suffix 
changes” 

Syslog Server  The IP address or URL of System log server. This feature is especially useful for ITSP 

(Internet Telephone Service Provider) 

Select the ATA to report the log level. Default is NONE. The level is one of DEBUG, 
INFO, WARNING or ERROR. Syslog messages are sent based on the following 
events: 

1.  product model/version on boot up (INFO level) 
2.  NAT related info (INFO level) 
3.  sent or received SIP message (DEBUG level) 
4.  SIP message summary (INFO level) 
5.  inbound and outbound calls (INFO level) 
6.  registration status change (INFO level) 
7.  negotiated codec (INFO level) 
8.  Ethernet link up (INFO level) 
9.  SLIC chip exception (WARNING and ERROR levels) 
10.  memory exception (ERROR level) 

The Syslog uses USER facility. In addition to standard Syslog payload, it contains the 
following components: 
 
GS_LOG: [device MAC address][error code] error message 
 
Here is an example: May 19 02:40:38 192.168.1.14 GS_LOG: [00:0b:82:00:a1:be][000] 
Ethernet link is up 

URI or IP address of the NTP (Network Time Protocol) server, which will be used by the 
phone to synchronize the date and time.  

Work in progress. 

By default it is 554. 

 

Grandstream Networks, Inc. 

GXW-410xv User’s Manual 

Page 15 of 30