Manualsbrain.com
  1. Manuels
  2. Marques
  3. Quantum Audio
  4. STT3401A
  5. Manuel D’Utilisation

Quantum Audio STT3401A Manuel D’Utilisation

Télécharger
Page de 137
Chapter 5 
 
ATAPI Interface 
Page 32 
Seagate Travan 40 Product Manual 
ANSI Version: This field indicates the ANSI compliance level. A value of 001b 
indicates compliance with SCSI Standard X3.131-1986. A value of 010b indicates 
compliance with QIC-121 (SCSI-2). 
TrmIOP: Terminate I/O message is supported. The Term I/O bit shall be set to 1. 
Response Data Format: This field will have a value of 2h to indicate compliance 
with the QIC-121 (SCSI-2) inquiry data format, or a value of 1h to indicate the  
SCSI-1 option has been selected.  
Additional Length: This field indicates that there are 31 (1Fh) bytes following this 
byte. 
Sync: The Sync bit is always set to 1, indicating the drive supports synchronous data 
transfer. 
Vendor Name: Bytes 8-0Fh are set to the ASCII values for the Vendor Name per the 
table below. 
Product Name: Bytes 10-1Fh are set to ASCII values for the Product Name. See the 
table below. 
Vendor name 
( _ = space) 
 
Product name 
 
Drive description 
“Seagate_” 
“STT3401A” 
Travan 40 drive 
Firmware Revision Level: Bytes 20h-23h contain Firmware Revision.