Quantum Audio STT3401A Manuel D’Utilisation
Chapter 5
ATAPI Interface
Page 72
Seagate Travan 40 Product Manual
BOP: The Beginning Of Partition bit, if set to 1, indicates that the logical unit is at the
beginning-of-partition in the current partition.
beginning-of-partition in the current partition.
EOP: The End Of Partition bit, if set to 1, indicates that the logical unit is at the end-
of-partition in the current partition.
of-partition in the current partition.
BPU: A Block Position Unknown bit of 1 indicates that the first and last block
locations are not known or cannot be obtained.
locations are not known or cannot be obtained.
Partition Number: The Partition Number reports the current partition position. 00h
indicates the Data partition, 01h indicates the Directory Partition.
indicates the Data partition, 01h indicates the Directory Partition.
First Block Location: The First Block Location reports the current tape block
address (i.e., the next to be read to the Host for READ command).
address (i.e., the next to be read to the Host for READ command).
Last Block Location: The Last Block Location reports the last tape block address to
be written to tape from the buffer for the WRITE command. This field is 0 if the
previous command was READ, VERIFY, SEEK, SPACE, or LOCATE.
be written to tape from the buffer for the WRITE command. This field is 0 if the
previous command was READ, VERIFY, SEEK, SPACE, or LOCATE.