Grandstream Networks HT503 FXS/FXO Manuel D’Utilisation

 

Follow Table 3 with voice menu option 01 to enable HT503 to use DHCP. 
 

Follow Table 3 with voice menu option 01 to enable HT503 to use STATIC IP mode, then use option 02, 
03, 04 to set up HT503’s IP, Subnet Mask, Gateway respectively. 

 

Follow Table 3 with voice menu option 06 to configure the IP address of the TFTP server. 
 

 

Select voice menu option 13 to configure the IP address of the firmware server.  

Select voice menu option 14 to configure the IP address of the configuration server.  

Select voice menu option 15 to choose firmware and configuration upgrade protocol. User can choose 
between TFTP and HTTP. 

Select voice menu option 17 to choose firmware upgrade mode.  There are three options: 
1) always check, 2) check when pre/suffix changes, and 3) never upgrade 
 

Grandstream Networks, Inc. 

Page 17 of 35