Grandstream Networks HT503 FXS/FXO Manuel D’Utilisation
S
AVING THE
C
ONFIGURATION
C
HANGES
Once a change is made, users should click on the “Update” button in the Configuration page. The HT503
will display a confirmation screen to confirm that the changes have been saved. Click ‘Reboot’ to save
all changes. Please reference the GUI pages using the following link:
will display a confirmation screen to confirm that the changes have been saved. Click ‘Reboot’ to save
all changes. Please reference the GUI pages using the following link:
Remote Reboot of the HT503
The administrator can remotely reboot the HT503 by clicking on the “Reboot” button at the bottom of the
configuration page. Once done, the following screen will be displayed to indicate that rebooting is
underway. You can login again after about 30 seconds.
configuration page. Once done, the following screen will be displayed to indicate that rebooting is
underway. You can login again after about 30 seconds.
F
IGURE
4:
S
CREENSHOT OF
R
EBOOTING SCREEN
Grandstream Device Configuration
The device is rebooting now...
You may relogin by clicking on the link below in 30 seconds.
All Rights Reserved Grandstream Networks, Inc. 2004
NOTE: Interrupting the ‘booting up’ process could permanently damage the device.
Grandstream Networks, Inc.
HT503 User Manual
Page 31 of 35
Firmware 1.0.0.6
Last Updated: 6/2007