Grandstream Networks HT503 FXS/FXO Manuel D’Utilisation

Page de 35
 
B
ASIC 
O
PERATIONS
 
G
ET 
F
AMILIAR WITH 
V
OICE 
P
ROMPT
 
HT503 has a stored voice prompt menu for quick browsing and simple configuration. Currently, the voice 
prompt menu is designed for the FXS port only. Dial “***” from the analog phone to enter the voice 
prompt.  
 
T
ABLE 
4:
  
HT503
 
IVR
 
M
ENU 
D
EFINITIONS
 
Menu 
Voice Prompt 
Options 
Main Menu 
“Enter a Menu Option” 
Press “*” for the next menu option 
Press “#” to return to the main menu 
Enter 01-05, 07,12-17,47 or  99 menu options 
01 
“DHCP Mode”, 
“Static IP Mode” 
Press “9” to toggle the selection 
If using “Static IP Mode”, configure the IP address information using 
menus 02 to 05.  
If using “Dynamic IP Mode”, all IP address information comes from 
the DHCP server automatically after reboot. 
02 
“IP Address “ + IP address 
The current WAN IP address is announced 
If using “Static IP Mode”, enter 12 digit new IP address. 
03 
“Subnet “ + IP address 
Same as menu 02 
04 
“Gateway “ + IP address 
Same as menu 02 
05 
“DNS Server “ + IP address 
Same as menu 02 
07 
 Preferred Vocoder 
Press “9” to move to the next selection in the list: 
• 
PCM U / PCM A 
• G.723 
 
• 
G.729   
• G.726 
• iLBC 
12 
WAN Port Web Access 
Press “9” to toggle between enable / disable  
13 
Firmware Server IP Address 
Announces current Firmware Server IP address.  Enter 12 digit new 
IP address. 
14 
Configuration Server IP 
Address 
Announces current Config Server Path IP address.  Enter 12 digit 
new IP address. 
15 
Upgrade Protocol 
Upgrade protocol for firmware and configuration update. Press “9” 
to toggle between TFTP / HTTP 
16 
Firmware Version 
Firmware version information. 
17 
Firmware Upgrade 
Firmware upgrade mode. Press “9” to toggle among the following 
three options: 
          - always check 
          - check when pre/suffix changes 
          - never upgrade 
47 
“Direct IP Calling” 
Enter a 12 digit IP address to make a direct IP call, after dial tone.  
(See “Make a Direct IP Call”.) 
99 
“RESET” 
Press “9” to reboot the device; or 
Enter encoded MAC address to restore factory default setting (See 
Restoring Factory Settings”) 
 
“Invalid Entry” 
Automatically returns to main menu 
 
Grandstream Networks, Inc. 
HT503 User Manual 
Page 9 of 35  
 
Firmware 1.0.0.6 
Last Updated: 6/2007