Hawking Technology HWU54D Manuel D’Utilisation

 

The Configuration Utility is a powerful application that helps you configure the 
Hawking Technologies 802.11g Wireless LAN Hi-Gain USB Adapter and monitor the 
link status during the communication process. 
 
The Configuration Utility appears as an icon on the system tray of Windows while the 
card is running. You can open it by double-clicking the icon. 
 

 

 
Right click the icon, there are some items for you to operate the configuration utility. 

z

 

Open Utility Window 
Select “Open Utility Window” to open the Configuration Utility tool. 

z

 

Exit ZDWlan 
Select “Exit ZDWlan” to close the Configuration Utility tool. 

 
Before using the utility, you have to know some restrictions of the utility. 
1.  If you want to connect to an 11g (up to 54Mbps) network, please ensure to install 

the adapter to a PC or laptop with an available USB 2.0 interface. This adapter is 
backwards compatible with USB 1.1 or USB 1.0 interfaces, however due to the 
performance limitations of legacy interfaces the adapter cannot perform at its 
optimal level. 

2.  Under Ad-Hoc mode the adapter works in 802.11b mode only. This is a rule 

defined by the WiFi Organization. If you want to enable the data rate up to 
54Mbps (11g), please follow the steps listed below. 
A.  Go to “Network Connections”. 
B.  Right Click the “Wireless Network Connection” and select “Properties”. 
C.  From the pop-up screen, click “Configure”. 
D.  Enter into “Advanced” page of the “Properties” screen. 
E.  Enable the setting of “IBSS_G_Mode”. 

 

When you open the Configuration Utility, the system will scan all channels to find the 
access points/stations within the accessible range of your card and automatically 
connect to the wireless device with the highest signal strength. From this screen, you 
can find details and information on the wireless networks in your environment.     
 
 
 
 
 
 
 

13