Hawking Technology HWPS1UG Manuel D’Utilisation
8.4 WIRELESS
8.4.1 Wireless Setup
In order to enable the HWPS1UG’s wireless functions, you must first enable
this feature on the print server.
Under the Device Status window, please select either “auto” or “enable” if
you wish to use the wireless features of this print server.
this feature on the print server.
Under the Device Status window, please select either “auto” or “enable” if
you wish to use the wireless features of this print server.
Auto: Use either wireless or wired LAN to connect to the HWPS1UG
Enable: Enables Wireless only LAN connection
Disable: Disables wireless LAN connection
NOTE: If using the AUTO Wireless setting, please unplug your
Ethernet cable and power cable once configuration settings are
saved. Re-insert your power cable to boot the print server into
Wireless Mode.
Ethernet cable and power cable once configuration settings are
saved. Re-insert your power cable to boot the print server into
Wireless Mode.