Hawking Technology HWPS1UG Manuel D’Utilisation
10.3 Get Setting Values – “get ” Command
The “get ” command is used to get the setting values of this
print server. The format of the “ get” command is as follows :
print server. The format of the “ get” command is as follows :
get argument
The argument value will then be displayed after the command.
For example, if I want to get the IP address of the print server,
I type in the “get ip ” command and the IP value
I type in the “get ip ” command and the IP value
“IP_ADDR=’192.168. 1.250’” is displayed:
admin# get ip
IP_ADDR=’192.168.1.250’
If you enter “get” only, the system will list all available
arguments of “get ” command.
The following table lists all the arguments whose value can be
obtained by the “get” command:
Argument
Description
Example
psname
Print server name
admin# get psname
PORT1_PS=’PS2548
96’
96’
password
Login password
admin# get password