Hawking Technology H-WU300 Manuel D’Utilisation

Page de 40
25
You must select a SSID if you use the 802.11 Ad hoc.
      If you have trouble connecting other brands’ IEEE 802.11b devices using the 
“802.11 Ad Hoc” mode, please try “Ad Hoc” mode. The next section shows 
you the basic setting of the “Ad Hoc” mode.
B. Ad Hoc Mode 
Please follow the procedures below to set the “Ad Hoc” Mode: 
1. 
Select the “Setting” tab. 
2. 
Select “Ad Hoc” for Network Type. 
3. 
Select the correct channel. (The channel of all computers in one 
workgroup must be the same.) 
4. 
Press the “Apply” button. 
‹
Channel 
shows radio channel numbers used for networking. Channel 
number must be the same between stations so computers can communicate in 
the same local LAN. It can be changed only under the Ad Hoc Mode.