IBM EtherLink XL Manuel D’Utilisation
3-8
C
HAPTER
3: I
NSTALLING
THE
N
ETWORK
D
RIVER
If this 3C905B-TX adapter is replacing an adapter already
installed, follow these steps:
installed, follow these steps:
a Select the existing adapter (that is being replaced) in the
Installed Adapters group.
b Click Remove.
c Click Yes in the Warning dialog box.
d Reboot the PC and repeat steps 2, 3, and 4.
5 Click Add Adapter.
6 In the Select Network Adapter window, select
Have Disk.
7 Insert EtherDisk Diskette #2 in drive A and in the
Insert Disk window, click OK.
8 In the Select OEM Option box, select 3Com EtherLink
Adapter (3C905B).
9 Click OK.
10 Select the Protocol tab.
11 Select the appropriate protocol for your network.
12 In the Network Settings window, click Close.
If you are prompted for network information, enter the
information supplied by your MIS department.
information supplied by your MIS department.
Windows NT prompts you to reboot.
13 Click Yes to restart your PC.
The driver installation is complete.
To confirm successful installation, double-click the Network
icon in the Control Panel. Click the Adapters tab. The
3C905B-TX adapter should appear in the list. If it does not
appear, see Appendix B for troubleshooting information.
icon in the Control Panel. Click the Adapters tab. The
3C905B-TX adapter should appear in the list. If it does not
appear, see Appendix B for troubleshooting information.