Havis-Shields C-TCB-MAK Fascicule
INSTALL INSTRUCTIONS C-TCB-MAK
MONITOR ADAPTER KIT
FOR USE ON ALL STRAIGHT POLED C-TCB’S
TOOLS REQUIRED:
Ratcheting wrench
Sockets - 7/16”, ½”
Combination wrenches - 7/16”, ½”
Ratcheting wrench
Sockets - 7/16”, ½”
Combination wrenches - 7/16”, ½”
T-20 torx bit
3/16” Allen key
3/16” Allen key
HARDWARE:
ITEM # QTY DESCRIPTION PART
#
1
1
Rotating TCB plate
CM93073-2
2 1
Bolt/nut
weldment
CM001491
3
1
5/16-24 Flex nut
CM86209
4
1
5/16-24 x 1” Socket head cap screw
CM86502
5
2
5/16” Belleville stainless washer
GSM31092
6
2
5/16” x 2” Fender washer
GSM31020
7
1
5/16-24 Hex jam nut
GSM30070
8
1
5/16-18 nylock nut
GSM30017
Always
!
Read all instructions before installing any Havis-Shields Equipment Corp products.
Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
Use hardware provided with install kit
Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
Use hardware provided with install kit
#2
#3, 4, 5, 6, 7
#1
Straight inner
pole assembly
#5, 8