Honeywell DCP552 Mark II Manuel D’Utilisation

A general reset can be performed when the controller is in the READY AUTO mode in the normal display mode. If

not in the normal display mode, press the 

to invoke it. A general reset has the following functions.

Program settings such as program numbers 1 to 49 are all deleted. Parameters are reset to their factory defaults and

the READY AUTO program run mode is invoked.

■

(1) Invoke the READY AUTO mode for both CH1 and CH2. Or set variable

parameters 

and 

to 0.

(2) Press the 

, 

and 

and you are prompted to

confirm a general reset. “

” is displayed in display panel 1.

(3) Press the 

to execute the general reset and start startup operations

that occur after a power up.

Press the 

cancels the general reset and returns the normal display

mode.

●

In the fixed command control mode, program number, segment number and

profile display go off.

•

When the RAM backup fails at startup, the controller automatically prompts

you to confirm a general reset – no key input is required - and “

” flashes

in display panel 1.

Press the 

to execute the general reset. All other keys are invalid.

•

A general reset does not return the following settings to factory default values.

: these values are stored.

Note, however, that a general reset resulting from a RAM failure at startup

resets also these settings to factory default values.

 

  
   

→

      

→