Honeywell DCP552 Mark II Manuel D’Utilisation

A total of 49 programs can be selected with the operation keys.

■

• Press the 

in the READY program run mode and basic display

status. The program number starts to flash.

• Press the 

when the program or segment number starts flashing to

cycle through set program numbers when several programs have been set. The

segment number is set to 1.

• Use the 

↑ or ↓

when the program number is flashing to select a program

number regardless of whether a program has been set or not. The segment

number is set to 1.

• Use the 

↑ or ↓

when the segment number is flashing to select a segment

number. When no program has been set, only 1 can be selected. When a

program has been set, any of the set segments can be selected.

• The message panel displays the program tag when a program or segment

number flashes. The 8-character tag display is off when no program has been

set.

• Press the 

to start RUN mode operation from the displayed segment

number when the program or segment number is flashing.

• Programs cannot be selected during external switch input.

• Selections cannot be made in fixed command control mode, RUN,

HOLD, END and READY FAST modes.

• When variable parameter 

4 is set to 0, separate program numbers

can be selected for CH1 and CH2 using the keys. When variable
parameter 

is set to 1, only the same program number can be set

for CH1 and CH2 using the keys.

• When variable parameter 

is set to 1, the RUN mode can be

invoked with the 

only when a program with the selected

number is set both in CH1 and CH2.

   

  

 

 

↑

↓

←

→

     

→

←

  

 

↑

↓

←

→