iogear Q1042 Fascicule

Note: Before initial usage, we recommend that you fully charge GBMA211 for at 

least 2 hours.

FUN
IOGEAR offers connectivity solutions that are innovative, fun, and stylish, 
helping people enjoy daily life using our high technology products.

GREEN
IOGEAR is an environmentally conscious company that emphasizes the 
importance of conserving natural resources.  The use of our technology 
solutions helps reduce electronic waste.

HEALTH
IOGEAR supports healthy and fit lifestyles.  By integrating products with 
the latest scientific developments, IOGEAR’s solutions enhance the life of 
end-users.

© 2008 IOGEAR, INC.

GBMA211

PART NO. Q1042 

This product carries a 1 Year Limited Warranty. For the terms and conditions of 
this warranty, please go to http://www.iogear.com/support/warranty or call 
1-866-946-4327(U.S. only) or (949) 453-8782.

Register online at http://www.iogear.com/register

Important Product Information

Product Model _________________

Serial # _______________________

Toll Free 866-9-IOGEAR (USA)
Phone: 949-453-8782
23 Hubble
Irvine, CA 92618 USA
www.iogear.com
support@iogear.com

1. Blue / Red LED
2. ON / OFF Button
3. 3.5mm Audio Connector
4. Mini-USB 4 pin Charger Jack

Note: You have to fully charge the batteries for 6 hours before initial usage.

1. Connect the mini USB charging cable to the GBMA211 and any open USB 

port on your PC. You can also charge GBMA211 via AC adapter.

2. The LED on the GBMA211 will light up in red indicating that it is being 

charged.

3. When the charging is completed, the red LED will go off. 

          Note: Please connect the cable directly to your PC and avoid connecting it   

through other devices, such as a USB hub.

1. Hold ON / OFF Button for 7 seconds on your GBMA211 when it is in OFF mode 

to activate the pairing mode. GBMA211’s LED will be flashing blue and red 
alternately.

2. Activate the pairing mode on your Bluetooth Headset / Headphone. (Please 

refer to your Bluetooth Headset / Headphone’s user manual on how to activate 
pairing mode.)

3. Wait for the GBMA211’s LED to flash blue only to confirm that the two devices 

are connected to each other. Then you should be able to listen to music 
through GBMA211 with your Bluetooth Headset / Headphone. (For example, 
you can test to see if the GBMA211 is paired by plugging the 3.5mm or ¼” 
audio connector to your PC’s audio output. Then use any audio software to play 
your music to see you can hear any audio sound from your Bluetooth Headset / 
Headphone.)

1. Plug GBMA211 into the 3.5mm or ¼” audio jack of MP3 player or any audio 

source.

1 Bluetooth

®

 Stereo Audio Transmitter

1 Mini USB 4 Pin Charging Cable
1 3.5mm to ¼” Adapter
1 3.5mm Audio Extension Cable
1 Full Range Power Adapter
1 European Prong Changer
1 Quick Start Guide
1 Warranty / Registration Card

ON

Hold ON / OFF for 3 second when it’s OFF

OFF

Hold ON / OFF for 6 second when it’s ON

Pairing

Hold ON / OFF for 7 second when it’s OFF

Blue and Red LED

Paring Mode

Blue LED and Red LED flash 

alternately

Blue LED

Connected

Flash normally

Waiting to connect

Flash slowly

Power On

Flash 3 times quickly

Red LED

Charging

On

Charging completed

Off

Low battery

Power Off

Flash quickly every 5 second

Flash 3 times quickly

2. Turn on GBMA211.
3. Turn on your Bluetooth Headset / Headphone and wait for the blue LED to  

flash normally, then the two devices are successfully connected. (If 
GBMA211 cannot reconnect to any device after turning on for 1 minute, it 
will turn off automatically. Then please turn off both devices and move the 
device closer to each other then repeat step 3.) 

Note: GBMA211 can only reconnect to the last connected device. If you have 

paired with another device before the one you currently want to use, 
please go to Pairing with GBMA211 to re-pair the device.

4. Now, you should be able to listen to music from the MP3 player or any audio 

source.

5. Use the audio source’s Volume Up / Down control button to adjust the 

volume.

Note: You have to pair GBMA211 and the Bluetooth Headset / Headphone if 

you are trying to connect them for the first time. After the initial pairing 
process, GBMA211 will search and re-connect with the Bluetooth 
Headset / Headphone on standby status. (Please refer to Pairing with 
GBMA211 if you need to pair your Bluetooth device with GBMA211.)

• Available 3.5mm or ¼” Audio Jack
• A2DP supported Bluetooth Stereo Headphone or Speaker 

Bluetooth

Bluetooth

®

•Stereo Audio Transmitter

•Stereo Audio Transmitter

nnector

harger Jack

Start Here!

FRONT

BACK