MRV Communications TS800/155 Manuel D’Utilisation
M R V C o m m u n i c a t i o n s , I n c . – I n s t a l l a t i o n M a n u a l
31
Figure 5.1a: JMP-L
Installation
This chapter shows how to mount the TereScope and and accessories
at the site (see Appendix D for the required material).
at the site (see Appendix D for the required material).
See Unpacking Instructions in Appendix C.
CAUTION: TereScope must be mounted in the horizontal position only;
CAUTION: TereScope must be mounted in the horizontal position only;
max angle 45
o
Accessories
The standard mounting accessories are supplied with the transceivers (TereScope
heads) in the kit. They are designed for typical mounting on horizontal and vertical
surfaces.
Description
The accessories kit (supplied by MRV) consists of:
surfaces.
Description
The accessories kit (supplied by MRV) consists of:
o
The Mounting Plate for TS700 and TS800
series (JMP-L)
series (JMP-L)
o
The Aiming Head
o
The Installer Tool Kit (JITK-L)
The JMP-L is used for mounting the transceiver on the support surface, i.e., a
horizontal concrete surface/plate only.
horizontal concrete surface/plate only.
Chapter
5
&&&&
JMP-L
Mounting Plate
(Dimensions in
mm)
Dimensions in mm
Screw for
grounding
grounding
Figure 5.1b: JMP-L scheme