ZyXEL Communications G-220 Manuel D’Utilisation

Page de 83
ZyAIR G-220 User’s Guide 
4-6                                                             
 
Access Point Mode Configuration 
Table 4-2 Access Point Mode: Configuration  
LABEL DESCRIPTION 
Key x 
(where x is a 
number 
between 1 and 
4) 
Select this option if you want to manually enter the WEP keys. 
Enter the WEP key in the field provided. 
If you select 64 Bits in the WEP field.  
 
Enter either 10 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (for 
example, 11AA22BB33) for HEX key type 
 or  
 
Enter 5 ASCII characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9” 
(for example, MyKey) for ASCII key type. 
 
If you select 128 Bits in the WEP field,  
 
Enter either 26 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (for 
example, 00112233445566778899AABBCC) for HEX key type 
 or  
 
Enter 13 ASCII characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9” 
(for example, MyKey12345678) for ASCII key type. 
If you select 256 Bits in the WEP field,  
 
Enter either 58 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (for 
example, 
0000111122223333444455556666777788889999AAAABBBBCCCC000011) 
for HEX key type 
 or  
 
Enter 29 ASCII characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9” 
(for example, MyKey111122223333444455556678) for ASCII key type. 
The values for the WEP keys must be set up exactly the same on 
all wireless devices in the same wireless LAN. 
ASCII WEP keys are case sensitive.  
Save 
Click Save to save changes. 
Cancel 
Click Cancel to discard changes. 
4.4  The MAC Filter Screen 
The MAC Filter screen allows you to configure the ZyAIR to give exclusive access to (Accept) devices or 
exclude devices from  (Reject) connecting to the ZyAIR. Every Ethernet device has a unique MAC (Media 
Access Control) address. The MAC address is assigned at the factory and consists of six pairs of