Multi-Tech Systems MTCBA-G-UF2 Manuel D’Utilisation

Chapter 2 – Installation 

Multi-Tech Systems, Inc. MultiModem® GPRS with USB User Guide 

 

 

 

 

The wireless USB MultiModem drivers need to be installed in your computer’s program directory. The 
procedure differs depending on the operating system. This section provides installation procedures for 
Windows Operating Sytems (Win 98/ME/2000/2003/XP). 

Linux Operating System drivers are also located on the CD in the Linux_Install directory. 

Three install wizards guide you through the software Installation.  In the following installation process, 

Part A  prepares you for the software installation.  

Part B installs the USB Driver.  

Part C associates the PC port with the USB Driver, and finally  

Part D installs the modem .inf file.  

CAUTION!

  DO NOT connect the MultiModem to the PC at this point.  Follow the steps below in 

sequence.  Premature connection of the USB cable will cause the installation to fail. 

If you have already plugged in the USB cable prematurely, cancel out of the installation wizard 
and follow the instructions below.

 

1.  Insert the MultiModem Product CD into your CDROM drive. Insertion of the product CD 

triggers the Autorun feature. 

 

 

2.   After a brief delay, the “MultiModem Setup – Welcome to” screen appears. Close the 

Welcome to screen.